Introducing Metal Maven's Round & Square 1-1/16" Guilloché Rolling Mill Component Die – designed for the discerning metalsmith, this die measures 3 inches by 3 inches. This die boasts not only a substantial size, but also four different round guilloché designs, offering a world of creative possibilities at your fingertips.
Priced at an affordable $18.75 per design, this die offers an exceptional blend of quality, size, and value.
Key Features:
Design Excellence: Elevate your metalsmithing projects with the versatility of four unique round guilloché patterns seamlessly integrated into a single 3x3-inch die. From classic swirls to contemporary motifs, this die invites you to explore a range of artistic expressions with every roll.
Optimal Size: The 3x3-inch dimensions of this rolling mill die make it affordable and user-friendly. This was designed with enamelists in mind, but the motifs can also be used as backplates for adding other jewelry components.
Precision Craftsmanship: Crafted with meticulous precision, this ROLLING MILL DIE is engineered from top-quality mild tool steel for use only in a rolling mill. The mild steel ensures durability and consistent performance, and will not harm the rollers on your mill. The fine detailing of each guilloché design guarantees professional results with every roll press.
Seamless Integration: Compatible with manual or electric rolling mills, this die effortlessly integrates into your metalsmithing toolkit. Whether you're a seasoned artisan or an enthusiastic beginner, achieve stunning outcomes with ease.
Creative Versatility: Tailored for use with various metals such as gold, fine silver, sterling silver, brass, bronze, and copper, this die set sparks a realm of creative exploration. Experiment with different materials and combinations to bring your artistic visions to life.
Metal Maven's Round & Square 1-1/16" Guilloché Rolling Mill Component Die
Usage
Metal Maven Rolling Mill Component Die Use Guidelines
These Rolling Mill Component Dies are for rolling mill use only. We tested them with a hydraulic press and we were able to get impressions. However, we also found that after the first couple of pressings the plates became dented. This happened because the type of tool steel necessary for use in a rolling mill is softer than the type of steel for using in a hydraulic press.
Your die will arrive lightly oiled with a lubricant called CorrosionX. It can be found at most auto supply stores. We highly recommend you use it or some kind of machine oil to protect your investment, especially if you live in a humid climate. We use it to keep rust from forming on our steel pieces, dies, rolling mill rollers and other tools. It also helps your silver or copper release from the die.
When you first set you rolling mill rollers, take your die and place a piece of dead soft copper on top of it. We have found that 20-gauge and 18-gauge copper works best. Then, place a piece of craft foam on top of your metal. Place them into the opened rollers of your mill and gently close your rollers until they touch the top of your die, metal, and foam sandwich. Try rolling your die at that setting first to see if you get an impression. If you do not get a good impression, adjust your rollers tighter and test again. Rolling too tightly could damage your die or cause your die to form a drastic curve, so be careful to tighten in small increments.
You can find the craft foam on Amazon - search for Darice 2mm Foamie Roll, 36-inch by 60-inch, black.
Return and Refund Policy
Please check the sizes carefully when ordering, as we do not accept returns or exchanges.
Please note that we check the quality of each die carefully before we send them out.
Shipping Info
We offer shipping via USPS. Your shipping options will appear in your shopping cart. Shipping Insurance is included on all orders.
